Networking Questions

What are the difference between hub and switch?

Hub is  layer 1 device. It out the signal from all of its port except the one from where its insert. It’s unable to find the collision. Its based to work on single collision and single broadcast domain.
Switch is layer 2 device. It maintains CAM table that store the MAC address of devices attached on its port. CAM table is used to make the forwarding decision. It works on each port collision and single broadcast domain. 

What is layer?

Layer is  fully logical partition of protocol data unit process. Layer defines how information travel form one computer to all over the network.

What is TCP/IP?

It’s  a combination of two protocols TCP and IP. It’s use for reliable data transfer.

What full form of TCP/IP?

Transmission Control Protocol/Internet Protol

What is operating system?

An operating system is the program that, after being initially loaded into the computer by a boot program, manages all the other programs in a computer. It provides a platform to application software.

What is the full form of .co.in, .com?

• COM - ".com" stands for "commercial".
• NET - ".net" stands for "network"
• ORG - ".org" stands for "organization"
• INFO - ".info" stands for "information"
• BIZ - ".biz" stands for "business".
• IN - 'IN' stands for India. The 'IN' is a 2-letter country code for India.

What is ring topology?

In a ring topology, device one connects to device two, device two connects to device three, and so on to the last device, which connects back to device one.

Which cable is used in LAN?

Generally we used coaxial and Twisted pair media is used in LAN networking.

What are Difference between STP and UTP?

STP cable is mostly used by IBM; it has an extra cover over each pair.
UTP cable is used in star topology. It has a single cover over all pair.

What is IEEE?

The Institute of Electrical and Electronics Engineers or IEEE (read eye-triple-e) is an international non-profit, professional organization for the advancement of technology related to electricity. It has the most members of any technical professional organization in the world, with more than 365,000 members in around 150 countries.

What is 802.3?

IEEE 802.3 is a collection of IEEE standards defining the physical layer and the media access control (MAC) of the data link layer of wired Ethernet. Physical connections are made between nodes and infrastructure devices hubs, switches and routers by various types of copper or fiber cable.

What is the full form of ping?

PING stand for Packet Internet Grouper 

What is MAC address?

It is the 48 bit hardware address of LAN card. MAC address is usually stored in ROM on the network adapter card and it is unique.

What are the minimum requirements for xp installation?

64MB RAM
1.5GB free HDD space
233MHz minimum processor.

What are 10Base2, 10Base5 and 10BaseT Ethernet LANs?

10Base2— An Ethernet term meaning a maximum transfer rate of 10 Megabits per second that uses baseband signaling, with a contiguous cable segment length of 100 meters and a maximum of 2 segments.
10Base5—An Ethernet term meaning a maximum transfer rate of 10 Megabits per second that uses baseband signaling, with 5 continuous segments not exceeding 100 meters per segment.
10BaseT—An Ethernet term meaning a maximum transfer rate of 10 Megabits per second that uses baseband signaling and twisted pair cabling.

What is the difference between an unspecified passive open and a fully specified passive open?

An unspecified passive open has the server waiting for a connection request from a client.
A fully specified passive open has the server waiting for a connection from a specific client.

Explain the function of Transmission Control Block?

A TCB is a complex data structure that contains a considerable amount of information about each connection.

What is a Management Information Base (MIB)?

A Management Information Base is part of every SNMP-managed device. Each SNMP agent has the MIB database that contains information about the device's status, its performance, connections, and configuration. The MIB is queried by SNMP.

What is anonymous FTP and why would you use it?

Anonymous FTP enables users to connect to a host without using a valid login and password. Usually, anonymous FTP uses a login called anonymous or guest, with the password usually requesting the user's ID for tracking purposes only. Anonymous FTP is used to enable a large number of users to access files on the host without having to go to the trouble of setting up logins for them all. Anonymous FTP systems usually have strict controls over the areas an anonymous user can access.

What is a pseudo tty?

A pseudo tty or false terminal enables external machines to connect through Telnet or rlogin. Without a pseudo tty, no connection can take place.

What does the Mount protocol do?

The Mount protocol returns a file handle and the name of the file system in which a requested file resides. The message is sent to the client from the server after reception of a client's request

What is External Data Representation?

External Data Representation is a method of encoding data within an RPC message, used to ensure that the data is not system-dependent.